Control Panels

Control Panels

TS247 has been operating for 20 years in the reactive and proactive development of control and monitoring systems for the power and energy distribution markets. We specialise in the following key areas:

  • Turnkey design and manufacture
  • Engineering procurement
  • Manufacture/Fabrication
  • Software Engineering
  • PLC
  • DCS
  • Vb Net
  • Consultancy
  • Service
  • Repair
PLC and RTU programming

With our in-house programmers, TS247 can program in many software packages including:

  • Siemens Step 5 and Step 7,
  • Rockwell RS500 and RS5000,
  • Schneider (Modicon, Telemecanique, AEG) PL7
  • General Electric LM90 and Proficy  and many IEC 61131 based platforms

TS247 is presently the intelligent platform integration partner of Alan Bradley (Rockwell) and General Electric, with many years of experience in producing Safety Integrity Level (SIL) 2 and 3 for Integrated Control and Safety Systems (ICSS) to adhere to IEC 61508 and 61511 standards.

SCADA and DCS programming

TS247 has experiences to cover most SCADA and DCS systems including:

  • Siemens T3000 and SPPA T3000
  • ABB 800xA GE OC 4 and  6000 system Cimplicity
  • Rockwell PlantPAX
  • Schneider
  • Invensys Wonder ware InTouch
  • Emerson Delta V
  • Honeywell TDS3000

TS247 offers a full range of consultancy services. With our highly qualified and experienced staff, we are able to offer the following:

  • Feasibility studies
  • Engineering reporting and design approval in both electrical and mechanical engineering
  • Design and structural reporting and design
  • Procurement and contract purchasing
All engineers are qualified to a minimum of:
  • Degree Standards in Electrical and Electronic Engineering
  • Degree Standards in Mechanical Engineering
  • Project Management to Prince 2
  • 18th Editions in Electrical BS7671
  • CompEx Hazardous Area electrical engineering
Site Service Engineers and personnel supply

TS247 prides itself in the technical ability of our site engineers. We give importance to the high standards of health and safety and safe working practices, therefore all our site engineers are equipped and trained to the highest safety levels based on the oil and gas offshore industry standards.

Turnkey Design

TS247’s preferred CAD package is SolidWorks; however, we are fully trained and can use customer-specific CAD systems if required.
The utilisation of all aspects of SolidWorks, like the integrated electrical design package, enables quick and accurate drawings. It also allows TS247 to carry out detailed finite element analysis (FEA) following a full design review, ensuring continuity from concept through design, manufacture, customer acceptance and sign off.

Following our in-house process, we can move into production, ensuring that the engineering and design staff takes the manufacturing process into a highly skilled and productive workshop.
Operating within the company’s internal operations enables problems to be rectified and redesigned. Rectification can be carried out in the minimum time scales, conforming to our ISO 9001 procedures so that we can ensure the manufacturing process is carried out to the highest EN and ISO standards. This guarantees total quality management throughout the manufacturing process with our in-house workshops.

24 Hour Support

TS247 offers a comprehensive system support service including emergency repair on and off-site 24 hours a day. TS247 appreciate that your process is more likely to fail after most service companies have closed.


Process controls are being superseded at an alarming rate, if the key equipment can’t be repaired or replaced quickly, retrofit is an important option.

Our control system engineers are capable of integrating new supportable equipment into existing mechanical and electromechanical configurations.

We champion a range of extremely flexible drive and process control platforms that minimise the cost and most importantly, the time from request to requirement.

Our projects:

Client: Avio

Project: Rotation and Synchronisation of Booster Rockets

Country: Colleferro, Italy

Project type: TURNKEY

The Design and Installation of the following equipment:

  • Rotor bearing and main drive condition monitoring
  • Gearing torque control
  • Speed pickup and rotor synchronisation
  • Data logging and process reporting
Client: GE Alstom

Project: Turbine Over Speed Upgrade

Country: Stafford, United Kingdom

Project type: TURNKEY

The design and installation of the following equipment:

  • Environmental control system including air flow monitoring and control
  • Fire damper and fire detection system
  • Main 60 Mw rotor speed controller
  • Rotor bearing and main drive condition monitoring
  • Rotor excitation DC control
  • Data logging and process reporting
Client: RWE International Power 

Project: Generator Black Start and Baring System

Country: Rugeley, United Kingdom

Project type: TURNKEY

The design and installation of the following equipment:

  • Backup UPS supply
  • DC to AC conversion
  • Speed monitoring
  • Gearing torque Control
  • Speed pickup and Rotor synchronisation
  • Data logging and process reporting
Client: Lafarge

Project: Main MV switch room and LV motor control centre (MCC)

Country: Leeds, United Kingdom

Project type: TURNKEY

The Design and Installation of the following equipment:

  • AIS MV switch Gear 9 bank substation
  • MV to LV transformer
  • AIS LV switch  and MCC
  • Main PLC Control Panels
  • Main Control room
  • UPS and Server Room
  • SCADA server and workstations
  • Local HMI and control panel